Case SR210 Specifications & Workshop Service Guide
The Case SR210 is a skid steer loader produced during 2013-2021, powered by a 74-horsepower FPT F5B Tier 4 Final Turbo diesel engine. It features an operating weight of 6,970 lbs (3,162 kg), a rated operating capacity of 2,100 lbs (953 kg, SAE J818), and an auxiliary hydraulic flow of 24.2 GPM at 3050 PSI (43.1 HHP).
Engine & Powertrain
- Engine Model
- FPT F5B Tier 4 Final Turbo
- Gross Output
- 74 HP
- Crankcase Oil
- 10.5 qts (15W-40 CJ-4 Low Ash)
- Cooling System
- 14.5 qts (50/50 Ethylene Glycol)
Hydraulic Circuit & Flow
- Auxiliary Flow
- 24.2 GPM (Standard Flow)
- Relief Pressure
- 3050 PSI
- Hydraulic HP
- 43.1 HHP (GPM × PSI / 1714)
- Reservoir Capacity
- 11.2 US Gal (Case Hy-Tran Premium / ISO VG 46)
- Total System Vol
- 15.0 US Gal (Includes cylinders)
- Drive Chain Case
- 6.8 US Gal (SAE 10W-30 Heavy Duty Oil)
Wix / Donaldson OEM Filter Cross-Reference
Standard fluid and filter change requires exactly 11.2 US gallons to reach the center of the sight glass. Never overfill.
Hydraulic cylinders and lines hold approximately 3.8 US gallons. Total system capacity for dry rebuilds is 15.0 US gallons.
The chain case holds 6.8 US gallons of SAE 10W-30 Heavy Duty Oil. It is completely isolated from the hydraulic circuit.
Case SR210 Technical Service Overview
Field service operations on the Case SR210 require adherence to manufacturer hydraulic pressure relief tolerances (3050 PSI) and torque specifications. When performing standard 250-hour preventative maintenance, always verify hydraulic filter condition, check drive chain tension, and inspect high-pressure auxiliary couplers for mechanical wear or weeping seals.
Empirical Engineering & Statutory Verification Matrix
All tolerances and fluid formulas cross-checked against primary heavy machinery standards.
| Engineering Parameter | Authoritative Source | Authority Body | Factory Tolerance / Rule |
|---|---|---|---|
| Case SR210 Rated Operating Capacity | SAE J818 Technical Specification Standard ↗ | 2,100 lbs (953 kg) | |
| Factory Service Manual Publication | Case Alpha Series Service Manual #47432061 (FPT F5B Tier 4 Final) | Verified Factory Documentation | |
| Hydraulic Reservoir Service Capacity | Case SR210 Lubrication Specification Table | 11.2 US Gallons (Case Hy-Tran Premium / ISO VG 46) | |
| FPT F5B Tier 4 Final Turbo Engine Output | Engine Manufacturer Service & Workshop Data | 74 Gross HP (10.5 qts 15W-40 CJ-4 Low Ash) |
Frequently Asked Technical Questions
Authoritative mechanical and operational answers verified against OEM shop manuals.
What is the rated operating capacity (ROC) of the Case SR210?
Under SAE J818 standards (50% of tipping load for wheeled loaders or 35% for tracked loaders), the Case SR210 has a Rated Operating Capacity of 2,100 lbs (953 kg). The static tipping load is 4,200 lbs (1,905 kg). Always operate within rated parameters to prevent rollover hazards.
What hydraulic fluid and reservoir capacity does the Case SR210 use?
The Case SR210 hydraulic reservoir requires 11.2 US gallons (42.4 Liters) of Case Hy-Tran Premium / ISO VG 46. The complete system capacity with cylinders and coolers holds 15.0 US gallons.
What engine powers the Case SR210 and what are the service intervals?
The Case SR210 is powered by a FPT F5B Tier 4 Final Turbo diesel producing 74 gross horsepower. The crankcase requires 10.5 quarts (9.9 Liters) of 15W-40 CJ-4 Low Ash. Oil changes are recommended every 100 to 250 operating hours based on duty cycle.
Where is the serial number located on the Case SR210?
Chassis VIN plate on front left corner of ROPS frame.
What Wix filters fit the Case SR210?
Primary cross-references for the Case SR210 are: Engine Oil: Wix 57181 / Donaldson P550943; Hydraulic: Wix 57321 / Donaldson P566412; Fuel: Wix 33972 / Donaldson P551424; Outer Air: Wix 46562 / Donaldson P827653. Always verify thread pitch and seal diameter prior to spin-on installation.