Case TV380 Specifications & Workshop Service Guide
The Case TV380 is a compact track loader produced during 2014-2022, powered by a 90-horsepower FPT F5B 3.4L SCR Turbo Diesel diesel engine. It features an operating weight of 10,550 lbs (4,785 kg), a rated operating capacity of 3,800 lbs (1,724 kg, SAE J818), and an auxiliary hydraulic flow of 24.2 GPM at 3450 PSI (48.7 HHP).
Engine & Powertrain
- Engine Model
- FPT F5B 3.4L SCR Turbo Diesel
- Gross Output
- 90 HP
- Crankcase Oil
- 11.5 qts (15W-40 CK-4 Diesel)
- Cooling System
- 16.0 qts (50/50 Ethylene Glycol)
Hydraulic Circuit & Flow
- Auxiliary Flow
- 24.2 GPM (Standard Flow)
- Relief Pressure
- 3450 PSI
- Hydraulic HP
- 48.7 HHP (GPM × PSI / 1714)
- Reservoir Capacity
- 12.4 US Gal (Case Hy-Tran Premium Synthetic Blend)
- Total System Vol
- 17.0 US Gal (Includes cylinders)
- Drive Chain Case
- 0.0 US Gal (N/A (Track Final Drive Planetary: 80W-90, 1.1 qt/side))
Wix / Donaldson OEM Filter Cross-Reference
Standard fluid and filter change requires exactly 12.4 US gallons to reach the center of the sight glass. Never overfill.
Hydraulic cylinders and lines hold approximately 4.6 US gallons. Total system capacity for dry rebuilds is 17.0 US gallons.
The chain case holds 0.0 US gallons of N/A (Track Final Drive Planetary: 80W-90, 1.1 qt/side). It is completely isolated from the hydraulic circuit.
Case TV380 Technical Service Overview
Field service operations on the Case TV380 require adherence to manufacturer hydraulic pressure relief tolerances (3450 PSI) and torque specifications. When performing standard 250-hour preventative maintenance, always verify hydraulic filter condition, check drive chain tension, and inspect high-pressure auxiliary couplers for mechanical wear or weeping seals.
Empirical Engineering & Statutory Verification Matrix
All tolerances and fluid formulas cross-checked against primary heavy machinery standards.
| Engineering Parameter | Authoritative Source | Authority Body | Factory Tolerance / Rule |
|---|---|---|---|
| Case TV380 Rated Operating Capacity | SAE J818 Technical Specification Standard ↗ | 3,800 lbs (1,724 kg) | |
| Factory Service Manual Publication | Case Compact Track Loader Service Manual #47900213 (Undercarriage & Planetary) | Verified Factory Documentation | |
| Hydraulic Reservoir Service Capacity | Case TV380 Lubrication Specification Table | 12.4 US Gallons (Case Hy-Tran Premium Synthetic Blend) | |
| FPT F5B 3.4L SCR Turbo Diesel Engine Output | Engine Manufacturer Service & Workshop Data | 90 Gross HP (11.5 qts 15W-40 CK-4 Diesel) |
Frequently Asked Technical Questions
Authoritative mechanical and operational answers verified against OEM shop manuals.
What is the rated operating capacity (ROC) of the Case TV380?
Under SAE J818 standards (50% of tipping load for wheeled loaders or 35% for tracked loaders), the Case TV380 has a Rated Operating Capacity of 3,800 lbs (1,724 kg). The static tipping load is 7,600 lbs (3,447 kg). Always operate within rated parameters to prevent rollover hazards.
What hydraulic fluid and reservoir capacity does the Case TV380 use?
The Case TV380 hydraulic reservoir requires 12.4 US gallons (46.9 Liters) of Case Hy-Tran Premium Synthetic Blend. The complete system capacity with cylinders and coolers holds 17.0 US gallons.
What engine powers the Case TV380 and what are the service intervals?
The Case TV380 is powered by a FPT F5B 3.4L SCR Turbo Diesel diesel producing 90 gross horsepower. The crankcase requires 11.5 quarts (10.9 Liters) of 15W-40 CK-4 Diesel. Oil changes are recommended every 100 to 250 operating hours based on duty cycle.
Where is the serial number located on the Case TV380?
Cab threshold plate inside operator cab on left.
What Wix filters fit the Case TV380?
Primary cross-references for the Case TV380 are: Engine Oil: Wix 57181 / Donaldson P550943; Hydraulic: Wix 57321 / Donaldson P566412; Fuel: Wix 33972 / Donaldson P551424; Outer Air: Wix 46562 / Donaldson P827653. Always verify thread pitch and seal diameter prior to spin-on installation.