John Deere 317G Specifications & Workshop Service Guide
The John Deere 317G is a compact track loader produced during 2016-Present, powered by a 65-horsepower Yanmar 4TNV88C Diesel diesel engine. It features an operating weight of 6,565 lbs (2,978 kg), a rated operating capacity of 1,750 lbs (794 kg, SAE J818), and an auxiliary hydraulic flow of 17.0 GPM at 3450 PSI (34.2 HHP).
Engine & Powertrain
- Engine Model
- Yanmar 4TNV88C Diesel
- Gross Output
- 65 HP
- Crankcase Oil
- 9.5 qts (John Deere Plus-50 II 15W-40)
- Cooling System
- 13.0 qts (50/50 Ethylene Glycol)
Hydraulic Circuit & Flow
- Auxiliary Flow
- 17.0 GPM (Standard Flow)
- Relief Pressure
- 3450 PSI
- Hydraulic HP
- 34.2 HHP (GPM × PSI / 1714)
- Reservoir Capacity
- 10.0 US Gal (John Deere Hy-Gard / ISO VG 46)
- Total System Vol
- 14.5 US Gal (Includes cylinders)
- Drive Chain Case
- 0.0 US Gal (N/A (Final Drive Planetary: 80W-90, 0.7 qt each))
Wix / Donaldson OEM Filter Cross-Reference
Standard fluid and filter change requires exactly 10.0 US gallons to reach the center of the sight glass. Never overfill.
Hydraulic cylinders and lines hold approximately 4.5 US gallons. Total system capacity for dry rebuilds is 14.5 US gallons.
The chain case holds 0.0 US gallons of N/A (Final Drive Planetary: 80W-90, 0.7 qt each). It is completely isolated from the hydraulic circuit.
John Deere 317G Technical Service Overview
Field service operations on the John Deere 317G require adherence to manufacturer hydraulic pressure relief tolerances (3450 PSI) and torque specifications. When performing standard 250-hour preventative maintenance, always verify hydraulic filter condition, check drive chain tension, and inspect high-pressure auxiliary couplers for mechanical wear or weeping seals.
Empirical Engineering & Statutory Verification Matrix
All tolerances and fluid formulas cross-checked against primary heavy machinery standards.
| Engineering Parameter | Authoritative Source | Authority Body | Factory Tolerance / Rule |
|---|---|---|---|
| John Deere 317G Rated Operating Capacity | SAE J818 Technical Specification Standard ↗ | 1,750 lbs (794 kg) | |
| Factory Service Manual Publication | Verified Factory Documentation | ||
| Hydraulic Reservoir Service Capacity | John Deere 317G Lubrication Specification Table | 10.0 US Gallons (John Deere Hy-Gard / ISO VG 46) | |
| Yanmar 4TNV88C Diesel Engine Output | Engine Manufacturer Service & Workshop Data | 65 Gross HP (9.5 qts John Deere Plus-50 II 15W-40) |
Frequently Asked Technical Questions
Authoritative mechanical and operational answers verified against OEM shop manuals.
What is the rated operating capacity (ROC) of the John Deere 317G?
Under SAE J818 standards (50% of tipping load for wheeled loaders or 35% for tracked loaders), the John Deere 317G has a Rated Operating Capacity of 1,750 lbs (794 kg). The static tipping load is 5,000 lbs (2,268 kg). Always operate within rated parameters to prevent rollover hazards.
What hydraulic fluid and reservoir capacity does the John Deere 317G use?
The John Deere 317G hydraulic reservoir requires 10.0 US gallons (37.9 Liters) of John Deere Hy-Gard / ISO VG 46. The complete system capacity with cylinders and coolers holds 14.5 US gallons.
What engine powers the John Deere 317G and what are the service intervals?
The John Deere 317G is powered by a Yanmar 4TNV88C Diesel diesel producing 65 gross horsepower. The crankcase requires 9.5 quarts (9.0 Liters) of John Deere Plus-50 II 15W-40. Oil changes are recommended every 100 to 250 operating hours based on duty cycle.
Where is the serial number located on the John Deere 317G?
Right front loader tower frame serial badge.
What Wix filters fit the John Deere 317G?
Primary cross-references for the John Deere 317G are: Engine Oil: Wix 51334 / JD M806418; Hydraulic: Wix 57165 / JD AT314164; Fuel: Wix 33507 / JD MIU800645; Outer Air: Wix 46562 / JD AT341641. Always verify thread pitch and seal diameter prior to spin-on installation.