John Deere 333G Specifications & Workshop Service Guide
The John Deere 333G is a compact track loader produced during 2016-Present, powered by a 100-horsepower Yanmar 4TNV98CT Turbo Diesel diesel engine. It features an operating weight of 12,100 lbs (5,488 kg), a rated operating capacity of 3,700 lbs (1,678 kg, SAE J818), and an auxiliary hydraulic flow of 25.0 GPM at 3450 PSI (50.3 HHP).
Engine & Powertrain
- Engine Model
- Yanmar 4TNV98CT Turbo Diesel
- Gross Output
- 100 HP
- Crankcase Oil
- 14.0 qts (Plus-50 II 15W-40 Diesel)
- Cooling System
- 18.0 qts (50/50 Ethylene Glycol)
Hydraulic Circuit & Flow
- Auxiliary Flow
- 25.0 GPM (Standard Flow)
- Relief Pressure
- 3450 PSI
- Hydraulic HP
- 50.3 HHP (GPM × PSI / 1714)
- Reservoir Capacity
- 14.5 US Gal (John Deere Hy-Gard Synthetic)
- Total System Vol
- 21.0 US Gal (Includes cylinders)
- Drive Chain Case
- 0.0 US Gal (N/A (Track Planetary: JD Extreme-Gard 80W-90, 1.2 qt each))
Wix / Donaldson OEM Filter Cross-Reference
Standard fluid and filter change requires exactly 14.5 US gallons to reach the center of the sight glass. Never overfill.
Hydraulic cylinders and lines hold approximately 6.5 US gallons. Total system capacity for dry rebuilds is 21.0 US gallons.
The chain case holds 0.0 US gallons of N/A (Track Planetary: JD Extreme-Gard 80W-90, 1.2 qt each). It is completely isolated from the hydraulic circuit.
John Deere 333G Technical Service Overview
Field service operations on the John Deere 333G require adherence to manufacturer hydraulic pressure relief tolerances (3450 PSI) and torque specifications. When performing standard 250-hour preventative maintenance, always verify hydraulic filter condition, check drive chain tension, and inspect high-pressure auxiliary couplers for mechanical wear or weeping seals.
Empirical Engineering & Statutory Verification Matrix
All tolerances and fluid formulas cross-checked against primary heavy machinery standards.
| Engineering Parameter | Authoritative Source | Authority Body | Factory Tolerance / Rule |
|---|---|---|---|
| John Deere 333G Rated Operating Capacity | SAE J818 Technical Specification Standard ↗ | 3,700 lbs (1,678 kg) | |
| Factory Service Manual Publication | Verified Factory Documentation | ||
| Hydraulic Reservoir Service Capacity | John Deere 333G Lubrication Specification Table | 14.5 US Gallons (John Deere Hy-Gard Synthetic) | |
| Yanmar 4TNV98CT Turbo Diesel Engine Output | Engine Manufacturer Service & Workshop Data | 100 Gross HP (14.0 qts Plus-50 II 15W-40 Diesel) |
Frequently Asked Technical Questions
Authoritative mechanical and operational answers verified against OEM shop manuals.
What is the rated operating capacity (ROC) of the John Deere 333G?
Under SAE J818 standards (50% of tipping load for wheeled loaders or 35% for tracked loaders), the John Deere 333G has a Rated Operating Capacity of 3,700 lbs (1,678 kg). The static tipping load is 10,570 lbs (4,794 kg). Always operate within rated parameters to prevent rollover hazards.
What hydraulic fluid and reservoir capacity does the John Deere 333G use?
The John Deere 333G hydraulic reservoir requires 14.5 US gallons (54.9 Liters) of John Deere Hy-Gard Synthetic. The complete system capacity with cylinders and coolers holds 21.0 US gallons.
What engine powers the John Deere 333G and what are the service intervals?
The John Deere 333G is powered by a Yanmar 4TNV98CT Turbo Diesel diesel producing 100 gross horsepower. The crankcase requires 14.0 quarts (13.2 Liters) of Plus-50 II 15W-40 Diesel. Oil changes are recommended every 100 to 250 operating hours based on duty cycle.
Where is the serial number located on the John Deere 333G?
PIN badge on right loader arm pillar and inside engine bay.
What Wix filters fit the John Deere 333G?
Primary cross-references for the John Deere 333G are: Engine Oil: Wix 57098 / JD RE504836; Hydraulic: Wix 57165 / JD AT314164; Fuel: Wix 33507 / JD MIU800645; Outer Air: Wix 46562 / JD AT341641. Always verify thread pitch and seal diameter prior to spin-on installation.