Kubota SVL75-2 Specifications & Workshop Service Guide
The Kubota SVL75-2 is a compact track loader produced during 2012-Present, powered by a 74.3-horsepower Kubota V3307-CR-TE4 Turbo Diesel diesel engine. It features an operating weight of 9,039 lbs (4,100 kg), a rated operating capacity of 2,300 lbs (1,043 kg, SAE J818), and an auxiliary hydraulic flow of 17.4 GPM at 3185 PSI (32.3 HHP).
Engine & Powertrain
- Engine Model
- Kubota V3307-CR-TE4 Turbo Diesel
- Gross Output
- 74.3 HP
- Crankcase Oil
- 11.6 qts (15W-40 CK-4 Heavy Duty Diesel)
- Cooling System
- 14.0 qts (50/50 Ethylene Glycol)
Hydraulic Circuit & Flow
- Auxiliary Flow
- 17.4 GPM (Standard Flow)
- Relief Pressure
- 3185 PSI
- Hydraulic HP
- 32.3 HHP (GPM × PSI / 1714)
- Reservoir Capacity
- 15.6 US Gal (Kubota Super UDT-2 / ISO VG 46 Anti-Wear)
- Total System Vol
- 20.5 US Gal (Includes cylinders)
- Drive Chain Case
- 0.0 US Gal (N/A (Planetary Final Drive: SAE 90 Gear Oil, 1.0 qt each))
Wix / Donaldson OEM Filter Cross-Reference
Standard fluid and filter change requires exactly 15.6 US gallons to reach the center of the sight glass. Never overfill.
Hydraulic cylinders and lines hold approximately 4.9 US gallons. Total system capacity for dry rebuilds is 20.5 US gallons.
The chain case holds 0.0 US gallons of N/A (Planetary Final Drive: SAE 90 Gear Oil, 1.0 qt each). It is completely isolated from the hydraulic circuit.
Kubota SVL75-2 Technical Service Overview
Field service operations on the Kubota SVL75-2 require adherence to manufacturer hydraulic pressure relief tolerances (3185 PSI) and torque specifications. When performing standard 250-hour preventative maintenance, always verify hydraulic filter condition, check drive chain tension, and inspect high-pressure auxiliary couplers for mechanical wear or weeping seals.
Empirical Engineering & Statutory Verification Matrix
All tolerances and fluid formulas cross-checked against primary heavy machinery standards.
| Engineering Parameter | Authoritative Source | Authority Body | Factory Tolerance / Rule |
|---|---|---|---|
| Kubota SVL75-2 Rated Operating Capacity | SAE J818 Technical Specification Standard ↗ | 2,300 lbs (1,043 kg) | |
| Factory Service Manual Publication | Kubota SVL75-2 Compact Track Loader Workshop Manual WSM-10491 | Verified Factory Documentation | |
| Hydraulic Reservoir Service Capacity | Kubota SVL75-2 Lubrication Specification Table | 15.6 US Gallons (Kubota Super UDT-2 / ISO VG 46 Anti-Wear) | |
| Kubota V3307-CR-TE4 Turbo Diesel Engine Output | Engine Manufacturer Service & Workshop Data | 74.3 Gross HP (11.6 qts 15W-40 CK-4 Heavy Duty Diesel) |
Frequently Asked Technical Questions
Authoritative mechanical and operational answers verified against OEM shop manuals.
What is the rated operating capacity (ROC) of the Kubota SVL75-2?
Under SAE J818 standards (50% of tipping load for wheeled loaders or 35% for tracked loaders), the Kubota SVL75-2 has a Rated Operating Capacity of 2,300 lbs (1,043 kg). The static tipping load is 6,570 lbs (2,980 kg). Always operate within rated parameters to prevent rollover hazards.
What hydraulic fluid and reservoir capacity does the Kubota SVL75-2 use?
The Kubota SVL75-2 hydraulic reservoir requires 15.6 US gallons (59.1 Liters) of Kubota Super UDT-2 / ISO VG 46 Anti-Wear. The complete system capacity with cylinders and coolers holds 20.5 US gallons.
What engine powers the Kubota SVL75-2 and what are the service intervals?
The Kubota SVL75-2 is powered by a Kubota V3307-CR-TE4 Turbo Diesel diesel producing 74.3 gross horsepower. The crankcase requires 11.6 quarts (11.0 Liters) of 15W-40 CK-4 Heavy Duty Diesel. Oil changes are recommended every 100 to 250 operating hours based on duty cycle.
Where is the serial number located on the Kubota SVL75-2?
Stamped on main chassis beam on lower right side beneath operator step.
What Wix filters fit the Kubota SVL75-2?
Primary cross-references for the Kubota SVL75-2 are: Engine Oil: Wix 57098 / Donaldson P550928; Hydraulic: Wix 57240 / Donaldson P568666; Fuel: Wix 33397 / Donaldson P550385; Outer Air: Wix 46562 / Donaldson P827653. Always verify thread pitch and seal diameter prior to spin-on installation.