Kubota SVL95-2s Specifications & Workshop Service Guide
The Kubota SVL95-2s is a compact track loader produced during 2016-Present, powered by a 96.4-horsepower Kubota V3800-CR-TIE4 Common-Rail Turbo diesel engine. It features an operating weight of 11,299 lbs (5,125 kg), a rated operating capacity of 3,200 lbs (1,451 kg, SAE J818), and an auxiliary hydraulic flow of 23.1 GPM at 3553 PSI (47.9 HHP).
Engine & Powertrain
- Engine Model
- Kubota V3800-CR-TIE4 Common-Rail Turbo
- Gross Output
- 96.4 HP
- Crankcase Oil
- 13.7 qts (15W-40 Heavy Duty Diesel (API CK-4))
- Cooling System
- 16.0 qts (50/50 Ethylene Glycol)
Hydraulic Circuit & Flow
- Auxiliary Flow
- 23.1 GPM (Standard Flow)
- Relief Pressure
- 3553 PSI
- Hydraulic HP
- 47.9 HHP (GPM × PSI / 1714)
- Reservoir Capacity
- 18.2 US Gal (Kubota Super UDT-2 Synthetic Hydrostatic)
- Total System Vol
- 24.0 US Gal (Includes cylinders)
- Drive Chain Case
- 0.0 US Gal (N/A (Planetary Final Drives: SAE 90 Gear Oil, 1.4 qts each))
Wix / Donaldson OEM Filter Cross-Reference
Standard fluid and filter change requires exactly 18.2 US gallons to reach the center of the sight glass. Never overfill.
Hydraulic cylinders and lines hold approximately 5.8 US gallons. Total system capacity for dry rebuilds is 24.0 US gallons.
The chain case holds 0.0 US gallons of N/A (Planetary Final Drives: SAE 90 Gear Oil, 1.4 qts each). It is completely isolated from the hydraulic circuit.
Kubota SVL95-2s Technical Service Overview
Field service operations on the Kubota SVL95-2s require adherence to manufacturer hydraulic pressure relief tolerances (3553 PSI) and torque specifications. When performing standard 250-hour preventative maintenance, always verify hydraulic filter condition, check drive chain tension, and inspect high-pressure auxiliary couplers for mechanical wear or weeping seals.
Empirical Engineering & Statutory Verification Matrix
All tolerances and fluid formulas cross-checked against primary heavy machinery standards.
| Engineering Parameter | Authoritative Source | Authority Body | Factory Tolerance / Rule |
|---|---|---|---|
| Kubota SVL95-2s Rated Operating Capacity | SAE J818 Technical Specification Standard ↗ | 3,200 lbs (1,451 kg) | |
| Factory Service Manual Publication | Kubota SVL95-2s Compact Track Loader Workshop Manual WSM-10582 | Verified Factory Documentation | |
| Hydraulic Reservoir Service Capacity | Kubota SVL95-2s Lubrication Specification Table | 18.2 US Gallons (Kubota Super UDT-2 Synthetic Hydrostatic) | |
| Kubota V3800-CR-TIE4 Common-Rail Turbo Engine Output | Engine Manufacturer Service & Workshop Data | 96.4 Gross HP (13.7 qts 15W-40 Heavy Duty Diesel (API CK-4)) |
Frequently Asked Technical Questions
Authoritative mechanical and operational answers verified against OEM shop manuals.
What is the rated operating capacity (ROC) of the Kubota SVL95-2s?
Under SAE J818 standards (50% of tipping load for wheeled loaders or 35% for tracked loaders), the Kubota SVL95-2s has a Rated Operating Capacity of 3,200 lbs (1,451 kg). The static tipping load is 9,143 lbs (4,147 kg). Always operate within rated parameters to prevent rollover hazards.
What hydraulic fluid and reservoir capacity does the Kubota SVL95-2s use?
The Kubota SVL95-2s hydraulic reservoir requires 18.2 US gallons (68.9 Liters) of Kubota Super UDT-2 Synthetic Hydrostatic. The complete system capacity with cylinders and coolers holds 24.0 US gallons.
What engine powers the Kubota SVL95-2s and what are the service intervals?
The Kubota SVL95-2s is powered by a Kubota V3800-CR-TIE4 Common-Rail Turbo diesel producing 96.4 gross horsepower. The crankcase requires 13.7 quarts (13.0 Liters) of 15W-40 Heavy Duty Diesel (API CK-4). Oil changes are recommended every 100 to 250 operating hours based on duty cycle.
Where is the serial number located on the Kubota SVL95-2s?
Serial plate riveted inside rear engine bay and stamped on track frame.
What Wix filters fit the Kubota SVL95-2s?
Primary cross-references for the Kubota SVL95-2s are: Engine Oil: Wix 57098 / Donaldson P550928; Hydraulic: Wix 57240 / Donaldson P568666; Fuel: Wix 33397 / Donaldson P550385; Outer Air: Wix 46562 / Donaldson P827653. Always verify thread pitch and seal diameter prior to spin-on installation.